当前位置 博文首页 > [Perl]文字/代码批量替换工具

    [Perl]文字/代码批量替换工具

    作者:admin 时间:2021-02-02 21:11

    Perl脚本batchReplace.pl可以用来批量替换文件中的文字/代码。可在指定目录中查找指定类型的文件,并递归检查子目录;在输出文件时复制输入文件的目录结构。

    [附件]Win32应用程序batchReplace.exe是由Perl脚本编译产生的可执行程序,不需安装Perl运行环境即可执行。


    在命令行中使用

    batchReplace.exe[ -i 输入文件路径(或包含文件的目录)][ -o 输出文件位置(文件或目录)][ -c 批量输入文件的扩展名,以“.”开始,多个扩展名之间以“|”隔开][ -m 匹配模式][ -I(忽略匹配内容的字母大小写)][ -G(全局查找要匹配的内容)][ -e 例外的字符串,是对匹配模式的补充,如果在匹配结果中发现有这样的字符串,做不匹配处理][ -r 替换的内容]

    上述参数没有顺序限制。当 -o 参数所涉及的文件路径不存在时,会自动创建。当输出文件已经存在时,文件原有的内容将被覆盖。(安全起见,请不要输出到输入文件的原始位置,以免造成不可恢复的损失。)

    例如:
    batchReplace.exe -i d:\gaoshu1 -o d:\do\123\456 -e http://www.blueidea.com/


    通过配置文件 batchReplace.set 设置参数

    配置文件中可包含以下设置项目(格式范例,注意大小写):


    Input=E:\fna\                 指定输入路径,相当于命令行参数 -i 的默认值。
    -i=E:\fna\                    同上。
    Output=E:\dnaWalks\           指定输出路径,相当于命令行参数 -o 的默认值。
    -o=E:\dnaWalks\               同上。
    Match=<iframe[^>]*>[\s\S]*?<\/iframe>  匹配模式,相当于命令行参数 -m 的默认值。
    -m=<iframe[^>]*>[\s\S]*?<\/iframe>  同上。
    Insensitive                   忽略匹配内容的字母大小写,相当于命令行参数 -I。
    -I                            同上。
    Global                        全局查找要匹配的内容,相当于命令行参数 -G。
    -G                            同上。
    Replacement=<h1>bound0</h1>   替换的内容,相当于命令行参数 -r 的默认值。
    -r=<h1>bound0</h1>            同上。
    Except=http://www.blueidea.com/ 例外的字符串,如在匹配结果中发现有这样的字符串,做不匹配处理,相当于命令行参数 -e 的默认值。
    -e=http://www.blueidea.com/   同上。
    CheckType=.htm|.html          当输入参数设为目录时,处理目录中包含的具有这些扩展名的文本文件(递归检查子目录)。相当于命令行参数 -c 的默认值。
    -c                            同上。

    每行放置一个项目。除内容之间不要有多余的空格或引号。 
    除必要的输入输出外,所有的设置项目都是可选的。命令行参数会覆盖相应的默认值。如果在配置文件中不包含Match或CheckType,会启用内置的默认值(同上面示例中给出的值)。Replacement默认为空字符,将匹配内容替换为空字符,也就是将匹配内容清除。

    欲在batchReplace.set中保留历史配置时,可在参数前放置任意非空白字符以取消其作用。
    例如:
    2007/04/06 Insensitive
    (此处的 Insensitive 将作为历史配置保留,不再生效。)

    2007/04/06 Replacement=<h1>bound0</h1>
    (此处的 Replacement=<h1>bound0</h1> 将作为历史配置保留,不再生效。)

    如果在配置文件的多行中出现同样的项目,以最后出现的设置为准,例如:
    CheckType=.htm|.html
    CheckType=.jsp
    -c=.asp|.php
    将设置CheckType的值为.asp|.php,也可以利用这个特性保留历史配置,方便调试。


    这个脚本写得比较仓促(是挤出吃晚饭的时间写的),以后有时间我还会改进。(因此转载请注明出处,并注意更新。)


    [免责声明]作者不承担用户因使用此工具而造成的任何意外损失。
    perl源码
    复制代码 代码如下:

    #file:batchReplace.pl
    #author:Bound0
    #created:2007-04-06
    #first published: http://bbs.blueidea.com/viewthread.php?tid=2734388

    my $match;
    my $replacement='';
    my $insensitive=0;
    my $global=0;
    my $gi;
    my $go;
    my $Checktype=".htm|.html";
    my $except;

    if(open(setfile,"<batchReplace.set"))
    {
        while(<setfile>)
        {
            if(/^\s*-I/){$insensitive=1}
            if(/^\s*-G/){$global=1}
            if(/^\s*-m=(.+)/){$match=$1}
            if(/^\s*-r=(.+)/){$replacement=$1}
            if(/^\s*-e=(.+)/){$except=$1}
            if(/^\s*-i=(.+)/){$gi=$1}
            if(/^\s*-o=(.+)/){$go=$1}
            if(/^\s*-c=(.+)/){$Checktype=$1}
            if(/^\s*Insensitive/){$insensitive=1}
            if(/^\s*Global/){$global=1}
            if(/^\s*Match=(.+)/){$match=$1}
            if(/^\s*Replacement=(.+)/){$replacement=$1}
            if(/^\s*Except=(.+)/){$except=$1}
            if(/^\s*Input=(.+)/){$gi=$1}
            if(/^\s*Output=(.+)/){$go=$1}
            if(/^\s*CheckType=(.+)/){$Checktype=$1}
        }
    }

    my $para=' '.join(' ',@ARGV);
    if($para=~/ -I */){$insensitive=1}
    if($para=~/ -G */){$global=1}
    my @ti=split(/ -i */,$para);
    if($ti[1]){($gi)=split(/ -(o|i|c|e|m|r|I|G)/,$ti[1])}
    unless($gi){print "No \"Input path\" parameter!";exit}
    my @to=split(/ -o */,$para);
    if($to[1]){($go)=split(/ -(o|i|c|e|m|r|I|G)/,$to[1])}
    unless($go){print "No \"Output path\" parameter!";exit}
    my @tc=split(/ -c */,$para);
    if($tc[1]){($Checktype)=split(/ -(o|i|c|e|m|r|I|G)/,$tc[1])}
    my @te=split(/ -e */,$para);
    if($te[1]){($except)=split(/ -(o|i|c|e|m|r|I|G)/,$te[1])}
    my @tr=split(/ -r */,$para);
    if($tr[1]){($replacement)=split(/ -(o|i|c|e|m|r|I|G)/,$tr[1])}

    unless($match){$match="<iframe[^>]*>[\\s\\S]*?<\\/iframe>";
    $insensitive=1;
    $global=1}

    my @tm=split(/ -m */,$para);
    if($tm[1]){($match)=split(/ -(o|i|c|e|m|r|I|G)/,$tm[1])}
    unless($match){print "No \"Match Pattern\" parameter!";exit}

    my $checktyp='(';
    $Checktype=~s/\./\\\./g;
    $Checktype=~s/\|/\)\|\(/g;
    $checktyp.=$Checktype.')$';

    my $excep;
    if($except){
    $excep=$except;
    $excep=~s/\//\\\//g;
    $excep=~s/\./\\\./g;
    $excep=~s/\|/\\\|/g;
    $excep=~s/\[/\\\[/g;
    $excep=~s/\]/\\\]/g;
    $excep=~s/\(/\\\(/g;
    $excep=~s/\)/\\\)/g;
    $excep=~s/\$/\\\$/g;
    $excep=~s/\?/\\\?/g;
    }

    my $replacemen;
    if($replacement){
    $replacemen=$replacement;
    $replacemen=~s/\//\\\//g;
    $replacemen=~s/\./\\\./g;
    $replacemen=~s/\|/\\\|/g;
    $replacemen=~s/\[/\\\[/g;
    $replacemen=~s/\]/\\\]/g;
    $replacemen=~s/\(/\\\(/g;
    $replacemen=~s/\)/\\\)/g;
    $replacemen=~s/\$/\\\$/g;
    $replacemen=~s/\?/\\\?/g;
    }

    sub cFile
    {
        my $fi;
        ($fi)=@_;
        if(opendir(DIR, $fi))
        {
            my @dir=readdir(DIR);
            closedir DIR;
            if("\\" eq substr $fi,(length $fi)-1){$fi=substr($fi,0,(length $fi)-1)}
            my @subdirs= grep { /^(?!\.)/ && -d "$fi\\$_" } @dir;
            foreach my $subdir (@subdirs)
            {
                cFile("$fi\\$subdir")
            }
            @files = grep { /$checktyp/i  && -T "$fi\\$_" } @dir;
            foreach my $fil (@files)
            {
                my $bp='';
                $bp=(substr $fi,(length $gi))."\\";
                my $bi="$fi\\$fil";
                my $bo=$go.$bp.$fil;
                remove($bi,$bo)
            }
        }
    }
    unless("\\" eq substr $go,(length $go)-1){$go.="\\"}
    if(-d $gi)
    {
        unless("\\" eq substr $gi,(length $gi)-1){$gi.="\\"}
        cFile($gi);
    }
    else
    {
        my $bu=substr $gi,(rindex $gi,'\\');
        my $bo=$go.$bu;
        remove($gi,$bo)
    }

    print "\nProcess Finished!";
    print "\n-i:$gi";
    print "\n-o:$go";
    print "\n-m:$match";
    if($except){print "\n-e:$except"}
    if($replacement){print "\n-r:$replacement"}
    sub remove
    {
        my $bi;
        my $bo;
        ($bi,$bo)=@_;

        print "\nprocessing $bi ...\n";
        unless(open(INPUT,"<$bi")){print "\n[Warn] Can not open the file <$bi>: $!";return}
        my @conts = <INPUT>;
        close INPUT;
        my $cont=join '',@conts;
        my $c;
        if($insensitive)
        {
            if($global)
            {
                unless($cont=~s/($match)/${$c=Cexcept($1)}$c/gi){die "$!"}
            }
            else
            {
                unless($cont=~s/($match)/${$c=Cexcept($1)}$c/i){die "$!"}
            }
        }
        else
        {
            if($global)
            {
                unless($cont=~s/($match)/${$c=Cexcept($1)}$c/g){die "$!"}
            }
            else
            {
                unless($cont=~s/($match)/${$c=Cexcept($1)}$c/){die "$!"}
            }
        }
        unless(open(OUT, ">$bo"))
        {
            if($!==2)
            {
                my $dbo=substr $bo,0,(rindex $bo,'\\');
                if(opendir(OUTDIR,$dbo)){closedir OUTDIR;print "\n[Warn] Can not open the output file <$bo>: $!";exit}
                else
                {
                    if($!==2)
                    {
                        unless(pmkpath($dbo)){print "\n[Warn] Can not creat the output directory <$dbo>: $!";exit}
                        unless(open(OUT,">>$bo")){print "\n[Warn] Can not open the output file <$bo>: $!";exit}
                    }
                    else{print "\n[Warn] Can not open the output directory <$dbo>: $!";exit}
                }
            }
            else{print "\n[Warn] Can not open the output file <$bo>: $!";exit}
        }

        print OUT "$cont";
        close OUT;
    }
    sub pmkpath
    {
        my @p=split(/\\/,shift);
        my $pa=$p[0];
        my $m=$#p+1;
        my $t;
        for($t=1; -e $pa;$t++){$pa.='\\'.$p[$t]}
        unless(mkdir $pa){return 0}
        for(;$t<$m;$t++)
        {
            $pa.='\\'.$p[$t];
            unless(mkdir $pa){return 0}
        }
        return 1
    }
    sub Cexcept
    {
        unless($except){return $replacemen}
        my $con;
        ($con)=@_;
        if($con=~/$excep/){return $con}else{return $replacemen}    
    }


    打包的exe文件下载
    js
下一篇:没有了